Rosedale
Specification
- Apex roof summerhouse
- Thicker than an average tongue & groove shiplap, including roof and floor
- 1.8m eaves height
- Joinery quality hardwood double door with mortice lock
- Large quantity of windows allows plenty of light
- 300mm roof canopy
- Toughened glass as standard
Size Code: Estimate size in feet, for example 1008 = approximately 10ft x 8ft.
Size FW x D x H: Front Width x Depth (front to back) x Height (top of the apex) in m (metres). Non-standard sizes are obtainable.
Windows: Amount of windows on the side elevations. This model of summerhouse, has windows on either side of the doors and windows on both side elevations. There are also two windows on each side elevation on 1.8m deep models, and there are four windows on each side elevation on 2.4m / 3.0m deep models.
Door W x H: Width x Height of the door in mm (millimetres). Please note, that the door gap is slightly smaller than the door itself.
Floor Plan: Select by size from the above table. These show the diameter of the floor along with the joins and the direction of the floor joists. Please note, that the direction of the floor joists can change so must be checked before ordering if critical.
Assembly Guides: Select by size from the above table. Please note that due to the amount of sizes, models and variations that we offer, the assembly guide may not be 100% specific to your summerhouse, but it should provide you with all the necessary principles.
Eaves Height: Internal height at the stunted point of the roof (sides).
Lock: This summerhouse comes as standard with a mortice lock and two keys.
Roof cover: Supplied with high quality polyester-based felt roofing.
