storage units
storage units
storage units
storage units

Log Store

Category:

Specification

  • Open fronted log store
  • Heavy duty slats
  • Tongue & groove floor and roof
  • Open front is on low side, with the roof sloping up to the back

Size Code: Estimate size in feet, for example 426 = approximately 4′ x 2’6″.

Size FW x D x H: Front Width (open side) x Depth (sloping ends) x Height (top of the roof) in m (metres). Non-standard sizes are also available.

Floor Plan: Select by size from the above table. These show the proportion of the floor along with the joins and direction of each floor joists. Please note, that the direction of the floor joists can change so this must be checked before an order is placed.

Assembly Guides: Select by size from the above table. Please note that due to the amount of sizes, models and variations which we offer, the assembly guide may not be 100% specific to your building, but it should provide you with all the necessary principles.

Internal: Height at the elevated and stunted sides of the roof internally.

Roof cover: Supplied with high quality polyester-based felt roofing.

 

Building Sizes
All sizes are an estimate and are based on the external measurements (unless stated contrarily) – they also do not encompass roof overhang. Please allow for any overhangs when choosing the size of your timber building, whilst also bearing in mind, the recommended space for installations and upkeep of your timber building. We advise you also check internal sizes when buying a timber building for a specific purpose, or any other sizes if critical. Planning permission may also be needed on some buildings depending on size and location, please check with your local council if unsure.

Related products