Clutterbox
Specification
- Free standing storage building
- Ideal for placing against a wall or fence
- Lower and narrower than the Wall shed
- Tongue & groove shiplap, including roof and floor
- Framed and braced double doors
- Doors are on low side, with the roof sloping up to the back
Size Code: Estimate size in feet, for example 426 = approximately 4′ x 2’6″.
Size FW x D x H: Front Width (long side) x Depth (sloping ends) x Height (top of the roof) in metres. Non-standard sizes are available.
Door W x H: Width x Height of the door in mm (millimetres). Please note that the door gap is smaller than the door itself.
Floor Plan: Select by size from the above table. This shows the size of the floor along with the joins and direction of the floor joists. Please note, that the directions of the floor joists can change so must be checked before ordering if critical.
Assembly Guides: Select by size from the above table. Please note that due to the amount of sizes, models and variations that we offer, the assembly guide may not be 100% specific to your timber building, but it should provide you with all the necessary principles.
Internal: Height at the elevated and stunted sides of the internal roof.
Lock: This timber building comes with a slide bolt suitable for fitting a padlock if needed.
Roof cover: We supply a high quality polyester-based felt roofing.
