Warwick Conversion
Specification
- Transverse apex roof shed
- Thicker than the average tongue & groove shiplap, including roof and floor
- Fully framed and braced door with three galvanised hinges
- Glass windows with window inserts
- 300mm roof overhang
Size Code: Estimate size in feet, for example 608 = approximately 6ft x 8ft.
Size L x W x H: Length (front to back) x Width (door end) x Height (to the top of the apex) in m (metres). Non-standard sizes are available.
Windows: Amount of windows on the front of the building.
Door W x H: Width x Height of the door in mm (millimetres). Please note, the door gap is slightly smaller than the door itself.
Floor Plan: Select by designated size from the table. These show the magnitude of the floor along with joins and direction of floor joists. Please note, that the direction of the floor joists can change so this must be checked before an order is placed if condemned.
Assembly Guides: Choose by size from the table, and please note that due to the number of sizes, models and modifications we offer, the assembly guide may not be 100% specified to your timber building, but should be provided with all the necessary principles.
Eaves Height: Internal height at stunted point of the roof (offset apex so lower at the back and higher at the front).
Lock: This timber building comes as standard with a press lock and two keys.
Roof cover: Supplied with high-quality polyester-based felt roofing.
